Image


M6 / M1 Junction 19 Improvements – bulk earthworks
This is the tab body content. It is typically best to keep this area short and to the point so it isn't too overwhelming.

Walters recently completed works on the M6 / M1 Junction 19 Improvement project for Skanska. The £9.8 million project involved bulk earthworks required to enable a complex junction improvement scheme for Highways England that in total cost £191 million.

Over 142,000 vehicles pass through this junction daily. The original junction 19 on the M1 gave rise to the following problems:

  • congestion, delays and long queues
  • accidents
  • conflicts between local and longer distance traffic
  • barriers to pedestrian, cyclist and horse rider movements

Without improvement, these problems would have become worse.

The scheme in detail

The improved junction provides the following direct free-flow links:

  • A14 to M1 northbound
  • M1 southbound to A14
  • M6 to A14 in both directions
  • M6 to M1 southbound
  • M1 northbound to M6

Aims

The objectives of the junction improvement are to:

  • relieve congestion at the junction and improve journey reliability
  • improve road safety
  • separate local traffic from long distance traffic
  • improve conditions for cyclists, pedestrians and horse riders
  • keep adverse environmental impacts, especially on the adjacent River Avon to a minimum
  • provide good value for money

Further details of the project can be found here….http://roads.highways.gov.uk/projects/m1-junction-19-improvement-scheme/

Power: MW
Operational Staus:
Technical Details:
Partners:
Operation: